Machinery4Glazing

White Translucent EVA Film 65% Visible Light Transmittance

*SUEPR CLEAR EVA FILM FOR LAMINATED SAFETY GLASS

*Super Milky White EVA Film 0% Visible Light Transmittance

*White Translucent EVA Film 65% Visible Light Transmittance

*Cool Jade White EVA Film 65% Visible Light Transmittance

Peter Lin

[email protected]

Whatsapp: +86 15013829504

WeChat: wecan365

Mobile: +86 15013829504

www.cncglass.com

EVAFORCE INTERLAYER FOR LAMINATED SAFETY GLASS

BEST CHOICE TO REPLACE EVASAFE INTERLAYER

Peter Lin, [email protected],

[email protected]

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www_cncGlass_com www_cncEVA_com

Due to their molecular structures and arrangements they are amorphous polymer materials, and that is why both of them have excellent optical properties, and the reason of why they have been used to laminate glasses for Architectural applications.

But it is not just on matters of their optical properties why they can be used in Architectural applications, it is also because of their mechanical properties. Their elastic modulus properties give them the needed properties to dilute the glass-glass dimensional and thermal dilatation tensions when in operation under different weathering environments.

Peter Lin, [email protected],

[email protected]

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www_cncGlass_com www_cncEVA_com

For architectural constructions security is a critical parameter that always should be warranted regardless of the type of glass laminate. That is why, for example to construct balustrade walls, it is not allowed to be built them with just a single piece of glass. Legislation force to use laminated glass systems to insure that when by any reason there is a breakage of one of the glasses, the other one will be able to sustain the small glass pieces adhered to its surface. Safety is first and legislation protect users, by requiring the use of laminated glasses. The process of lamination is looking for implementing of the security element between glasses. The main objectives of the non-glass element is to provide flexibility to the structure an also a good adhesion of the glass in case of glass breakage.

Either the PVB or the EVA are good materials for such a purpose. The differences between them show up in terms of their process-ability or the final mechanical properties (dilatation coefficients, young modulus, elastic modulus) of the product depending their final application and use. There is where the chemical and physical properties of both materials are important. The above mentioned differences in chemical composition and structure between EVA and PVB allow us the Chemist, Polymer Scientist and Chemical Engineers, play with the raw materials to convert and transform them into specific products with differential and desired performances. Even though it is true that we can manipulate these materials and “drive” them to behave in some extension along our desired performances, for such type of applications where safety is really important, any kind of “gummy materials” we might think to use, they are forced to reach some minimum value properties to fulfil the required security standards.

Having said that, it is important to mention that not all EVA or PVB materials are the same. Under the acronyms of EVA and PVB many different performance products might be considered. It is important to distinguish all of them by looking at their PDS (Product Data Sheets) that manufacturers need to provide. This is an important information to know by the glass lamination companies in order to produce the highest quality lamination glass products according their lamination equipment and processes. But this is not all, at this point here it is important to point out that the relevant properties of the laminated product are the final ones, we mean the ones that any laminate product should fulfil after these materials are laminated and are verified by norms by qualified certification institutes.

Peter Lin, [email protected],

[email protected]

Whatsapp: 0086 15013829504,

WeChat: WeCan365

www_cncGlass_com www_cncEVA_com

Another important property that needs to be fulfilled for this type of products is the adhesion to glass. As it has been previously mentioned, both polymer materials have acceptable intrinsic adhesion properties, but they can always be increased by the use of special additives to the corresponding polymer material. In principle EVA is a better adhesion material than PVB. PVB has an acceptable to low adhesiveness to glass. It has also a high higroscopicity.

In terms of adhesion, besides EVA and PVB, other materials can be used to laminate glasses. But most of them are liquid products that require to mix up at least two different solutions to react. This is not an easy job from the lamination manufacturing point of view. Moreover, as a final product one might end up with a glass adhesion interlayer with different degrees of elasticity that might not fulfil the required mechanical properties needed to be a good a glass interlayer element. The EVA and PVB, intrinsically are being supplied as films, they are easy to handle and to manipulate in the preparation of the glass laminates before they are transformed and integrated as the flexible element of the structured product. The use of films in the lamination process is a great manufacturing advantage compared to the use of liquid materials, even if part of the excellent adhesion is not reached by the use of the films.

One of the main differences between EVA and PVB is their water vapor transmission rate, coming from natural water or weather humidity.

PVB has an average of 8-9 times higher tendency to permeate water than EVA. This property gives to EVA a great advantage compared to PVB in terms of transportation, storage and use. Not just that also in terms of product resistance against weathering conditions. Normally due to capillarity PVB laminates suffer from water penetration around the edges and glass lamination pieces angles affecting negatively the durability and the mechanical resistance of the laminate.

Another important difference between these materials is that EVA, in contrast to the PVB, must be converted into a thermoset product during the lamination process. This process transforms the free and “soup of flowing molecules” in the mass into a chemically Crosslink EVA molecule. The lamination process, converts the interlayer material into an elastic, flexible, but at the same time into a structured and not any more temperature melted product. The laminated structure becomes a new stable and elastic interlayer between glasses that provides for the global structure with the required mechanical properties.

The chemical transformation of EVA might take place in small ovens taking care of vacuum and temperature process control. The cost of the equipment needed is much lower than the one used normally for PVB.

One of the great advantages of EVA is its lower water absorbing compared to the PVB, that allows to store and manipulate the film out of the climatic chambers where PVB needs to be manipulated before lamination.

Moreover, due to the lower adhesivity properties of PVB this film needs to be processed in autoclaves, where the pressure applied to the lamination structures helps to improve the limited adhesivity properties of PVB.

In the case of lamination of PVB, there is no chemical crosslinking process between molecules like it happens with EVA lamination processing.

BLUE SILICONE SHEET
BLUE SILICONE BLANKET
FOR EVA PVB SGP GLASS VACUUMING
Peter Lin, [email protected],
[email protected]
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncglass.com www.cnceva.com

Silicone rubber sheet for glass industry is a key component of our company dedicated to supporting the glass vacuum laminated furnace according to market demand.
Laminated glass vacuum furnace uses vacuum principle, make the glass heated under vacuum conditions, with the atmospheric pressure, let the glass in the vacuum bag pressed to exclude air and unable to make bubbles, vacuum bag is under heating and vacuum pumped conditions to make two or more pieces of glass and EVA hot together.
Vacuum bag is a core part of glass vacuum laminated furnace, it makes up of two pieces of silicone rubber sheet and silicone sealing edge, silicone rubber sheet is a key component of the entire laminated furnace, its quality directly affects the quality of glass products.

BLUE SILICONE SHEET
BLUE SILICONE BLANKET
FOR EVA PVB SGP GLASS VACUUMING
Peter Lin, [email protected],
[email protected]
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncglass.com www.cnceva.com

BLUE SILICONE SHEET BLUE SILICONE BLANKET FOR EVA PVB SGP GLASS VACUUMING Peter Lin, [email protected], [email protected] Whatsapp: 0086 15013829504, WeChat: WeCan365 www.cncglass.com www.cnceva.com Silicone rubber sheet for glass industry is a key component of our company dedicated to supporting the glass vacuum laminated furnace according to market demand. Laminated glass vacuum furnace uses vacuum principle, make the glass heated under vacuum conditions, with the atmospheric pressure, let the glass in the vacuum bag pressed to exclude air and unable to make bubbles, vacuum bag is under heating and vacuum pumped conditions to make two or more pieces of glass and EVA hot together. Vacuum bag is a core part of glass vacuum laminated furnace, it makes up of two pieces of silicone rubber sheet and silicone sealing edge, silicone rubber sheet is a key component of the entire laminated furnace, its quality directly affects the quality of glass products.

BLUE SILICONE SHEET
BLUE SILICONE BLANKET
FOR EVA PVB SGP GLASS VACUUMING
Peter Lin, [email protected],
[email protected]
Whatsapp: 0086 15013829504,
WeChat: WeCan365
www.cncglass.com www.cnceva.com

If you want to order too, please contact
Peter Lin
Mail: [email protected]
Whatsapp: 0086 15013829504

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

Super clear eva glass interlayer film
Outdoor white eva interlayer film series
Green tape for laminating sealing vacuuming, heating resistant
Thermal cutter trimming laminated glass edges remains by heating
www.cncGlass.com

1-EVAFORCE SUPER+ (COMPATIBLE) EVA INTERLAYER FILM

*Lowest melt viscosity
*Best compatibility with all kinds of uneven rough surface inserts
*Massive lamination, Largest sold quantity
*Great performance with affordable price
*Aim for architectural safety laminated glass
*Applied both indoor and outdoor

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

2-EVAFORCE EXTREME EVA INTERLAYER FILM

*Less overflowing during vacuuming heating
*Strengthened safety mechanical properties
*Recommended for extreme environments, safety tempered glazing or curved glass laminating
*Applied both indoor and outdoor
*Replacing PVB Film

EVAFORCE® SUPER CLEAR INTERLAYER FILM:for making architectural safety laminated glass

3-WHITE EVA GLASS INTERLAYER FILM

Milky White/White Opaque EVA Film 0% Visible Light Transmittance
Sandblasting White/White Translucent EVA Film 65% Visible Light Transmittance
Super Milky White/Super White Opaque EVA Film 0% Visible Light Transmittance